Escalators are one of the greatest means of transportation today and are a byproduct of the modern transformation when machines took over the heavy work of humans. However, during this time, few people knew how escalators work. The escalator step chain is driven by electricity and is the basic driving force of escalators. Step chains, also known as escalator chains, are used to move the steps on escalators or drive moving walkways. These chains consist of special sprockets. Usually, such escalator step chains are installed every approximately 400 mm gap and vary in width and height. The flexible strength of step chains varies from 6 tons to 30 tons. The 9-ton type and 15-ton type are the most common. However, escalator companies have several models and types of machines that are suitable for specific places or according to the needs and needs of customers. …
The chain pitch should be as small as possible to reduce the effect of the chord action caused by the chain/sprocket meshing. Using the smallest possible size allows the chain to work more easily. In addition, the installation method of the steps on the escalator step chain varies from country to country. For example, in Japan, the bearing part of the chain is the focal point of the chain plate. This is where the step shaft is mounted. In other countries, the steps use extended pins as the shaft of the step. For most escalators, it is usually the step side that carries the total weight of the passengers and the steps themselves. In other types of escalators, the roller chain carries the entire weight of the passengers and the steps. The step chain is designed to have better wear resistance related to the weight. This is because the pin diameter is larger than that of ordinary chains. In addition, the distance from one step to another and from each link to another is strictly coordinated. There are currently two types of machines that customers can choose from. The first is the lubrication-free type and the other is the low-noise type. The lubrication-free model requires actual lubrication for a longer period of time and regularly. On the other hand, customers who prefer a quiet environment mostly prefer the low-noise model.
How are these escalator step chains connected?
Most applications for these escalator step chains use small pitch conveyor chains and attachments in the following ways: conveying materials directly on the chain attachments and conveying materials on fixtures mounted on the attachments. The characteristics of the conveyed material and the working environment vary depending on the application. There are many types of attachments available, both with and without clamps. Modern standard attachments are proven and favoured based on long-term use and demand for attachment chains, they offer first class, economical and fast delivery to meet the needs of most customers. The steps must be able to support a load of 450 kg/m2 without deformation that would affect the normal operation of the escalator. The top surface of the steps must be flat and level in the area used by passengers and should be guided in the direction of travel.









