There are different classifications of chain sprockets. Chains are divided into transmission chains, conveyor chains, stainless steel chains, lifting chains, agricultural machinery chains, etc.
The sprocket is divided into a driving sprocket and a driven sprocket,
Driving sprocket: The driving sprocket is installed on the engine output shaft in the form of splines;
Driven sprocket: The driven sprocket is mounted on the driving wheel of the motorcycle, and the power is transmitted to the driving wheel through the chain.
Generally, the driving sprocket is smaller than the driven sprocket, which can reduce the speed and increase the torque.
Performance characteristics of drive sprocket
① Selection of materials-both the large sprocket and the small sprocket are made of high-quality carbon structural steel for stamping and forming.
②Machining and processing technology-the use of advanced milling processing technology to make the tooth profile more accurate. The entire sprocket has undergone quenching and tempering heat treatment, which greatly improves its comprehensive mechanical properties. The tooth profile hardness is above 68-72HRA, which significantly improves the wear resistance of the sprocket. The surface has been sprayed and electroplated.
③Product series-economical and practical ordinary sprocket and superior quality sprocket.
