Agricultural machinery gear maintenance and maintenance methods:
1. During the operation process, the dirt collected on the inner wall of the machine and mechanical parts is often removed in time, which can reduce the mechanical load and reduce the wear of the hammer claw or flail.
2. Standard gear oil should be added to the gear box in time. Generally, the oil level should be 1/3 of the gear immersed in the oil level. It is required that the gearbox should be cleaned and gear oil should be replaced when the equipment is maintained at the end of the operation every year; grease should be added once every shift (12 hours of operation) where grease is required.
3. Check the wear of the hammer claws or flail knife. When it is necessary to replace them, they should be replaced in groups to maintain the power balance of the knife shaft. The hammer claws of the same group should be graded according to their quality, and the weight difference should not exceed 25 grams. The knife can be installed on the drum.
