Good chain oil not only has the function of lubrication, but also can improve the operation efficiency of the chain and ensure the long-lasting and efficient transmission system. Many chain oil brands have invested heavily in research and development, and are committed to optimizing the performance of oil products, thereby effectively reducing the wear of sand and gravel on the chain and greatly extending its service life, which is very important for cyclists who love to travel.
Although many chain oil brands on the market claim to be the best choice, consumers don't have to be too entangled in this statement. After all, the core function of chain oil is to protect the chain. Therefore, if economic conditions permit, it is naturally ideal to choose high-quality chain oil. If the budget is limited, choosing a product with moderate cost performance can also meet basic needs. Next, we will explore in depth the working principles and usage methods of various chain oils, as well as how to choose the most suitable product for you.
1. The working principle of chain oil
When we oil the chain, we usually only drip a small amount of oil on the chain pin or the outer surface to ensure that the oil can penetrate deep into the chain to fully lubricate the fine parts. It is worth noting that overly thick automotive lubricants are not suitable for bicycle chains. In addition, in order to keep the chain lubricated continuously, it is recommended to develop the habit of regular oiling, especially after riding in rainy days. At the same time, be sure to avoid applying chain oil to flywheels, toothed discs, transmissions and other parts to ensure the specificity of the chain oil.
2. Classification of bicycle chain oil
Bicycle chain oil is mainly divided into wet and dry types. These two types of lubricants differ in usage conditions and effects, so the selection should be based on actual conditions. Wet lubricants are relatively viscous, have good water resistance, and have strong oil film adhesion and durability. It is suitable for long-term use in humid environments, such as long-distance travel, but its disadvantage is that it is easy to absorb dust. On the contrary, dry lubricants have a dry oil film and are not easy to absorb dust, but they are volatile and usually need to be re-oiled every two weeks or so.
In order to keep the chain in good condition and avoid damage to the chain due to oil failure or dust wear, we need to develop the habit of regular cleaning and maintenance of bicycles.
1. Tips for using dry lubricants
Due to the fact that dry lubricants are not easy to stick to dust, they are also suitable for cleaning chains. Just apply a thin layer of oil on the chain, grab the pedal and rotate it back a few times, then put on a clean old sock to wipe it, and the chain will be brand new.
2. Wet lubricants
Although wet lubricants can easily make the chain sticky and attract dust, making it black, the excellent waterproof performance of this lubricant brings great convenience to travelers, without worrying about damage caused by external factors such as rain. Before using wet lubricants, I recommend cleaning the chain with a detergent to ensure the cleanliness of the chain.
3. Wax chain oil
Wax chain oil has the characteristics of quick drying, is not easy to absorb dust, and the dirty wax on its surface will automatically fall off even during riding. In addition, its lubricating performance is also quite good. However, it should be noted that when using wax chain oil, it needs to be replenished regularly to ensure its continuous lubrication effect. At the same time, this lubricant is not suitable for use in a humid environment, which may affect its performance.
3. How to choose the right chain oil?
The choice of chain oil should be determined according to the individual's use environment. Wet chain oil performs well in long-distance riding or in bad weather conditions, especially for cyclists who cannot oil regularly. Dry chain oil is more suitable for regular and self-disciplined cyclists.
4. How to oil correctly?
Before oiling the chain, first make sure that the chain has been thoroughly cleaned. The choice of detergent can be determined according to personal circumstances, whether it is dishwashing liquid, washing powder or professional detergent. Next, follow the steps below:
1. Hang the chain on the large plate and small fly;
2. Rotate the pedal to make a thin layer of oil on the chain;
3. Rotate backward for about 30 seconds to ensure that all parts of the chain are evenly coated with oil;
4. Wipe off excess grease with a cloth or paper towel to avoid contaminating other parts;
5. Let the chain sit overnight so that the grease can fully penetrate and work.









