When the plate chain is used, it will cause rusting due to various reasons, affecting its service life and bringing economic losses to the enterprise. Understanding the cause of corrosion of the plate chain and doing a good job can prevent this problem. The following is a detailed introduction:
1. The quality of anti-rust lubricating oil and cleaning kerosene used in the production of plate chain can not meet the requirements of process technology.
2. In the process of production, the industrial chain production does not strictly follow the requirements of the chain parts in the processing process and the finished chain after assembly.
3. The environmental conditions of the place where the plate chain production enterprise is located are poor, the harmful substances in the air are high, and the turnover field is too small, so it is difficult to carry out effective anti-rust treatment. Coupled with the hot weather, production workers violated anti-rust procedures and other phenomena.
4. As the price of the chain steel is gradually decreasing, the chain steel coating tool is gradually falling. Such as the high content of non-metallic impurities in steel and metallographic deviation. The chain steel used in the production chain by the manufacturer is inferior.
5. The gap between the plate chain scraper and the bottom plate of the machine slot is too small, and the clinker is easily caught between the scraper and the machine slot, causing damage to the scraper plate or the bottom plate of the machine slot, and even a chain break accident occurs in severe cases.
